American Lighting AML-DEC-DMX-RJ45-5X5CH 25-Channel DMX Decoder, 5×5CH, RJ45/XLR3/XLR5, 12-24V DC, 4A per Channel

American Lighting 25-Channel DMX Decoder — 5×5 Multi-Group RGBW Control with RJ45, XLR3 & XLR5

The American Lighting AML-DEC-DMX-RJ45-5X5CH is a 5×5 channel DMX signal receiver and decoder delivering 25 total PWM output channels across 5 ports for use with DMX controllers and low-voltage lighting. Designed for multi-group DMX RGBW channel control, it supports RJ45, XLR3, or XLR5 DMX connections and features selectable 8-bit or 16-bit PWM output resolution with 0.1–9.9 gamma correction for smooth, precise dimming. Metal housing with digital display for on-device configuration.

Key Features

• 25 Total PWM Output Channels: 5 ports × 5 channels = 25 total PWM output channels at 4A per channel maximum.
• Multi-Group DMX RGBW Control: Supports multi-group DMX RGBW channel control for complex, multi-zone lighting installations.
• RJ45, XLR3, or XLR5: Flexible DMX input/output connections — compatible with RJ45, XLR3, and XLR5 signal wiring.
• DMX512/RDM Signal: Supports DMX512 and RDM input/output signal protocol.
• 8-Bit or 16-Bit PWM Resolution: Selectable 8-bit or 16-bit PWM output resolution ratio for smooth, precise dimming performance.
• Gamma Correction: 0.1 to 9.9 gamma value output dimming curve range for natural-looking dimming response.
• Max Load: 25 × 48–96W (4A per channel at 12–24V DC).
• Metal Housing with Digital Display: Durable metal enclosure with on-board digital display for easy on-device configuration.
• Input Voltage: 12–24V DC constant voltage.
• Output Current: 25 channels × 4A.
• Dimensions: 11.54"L × 3.62"W × 1.42"H.
• Storage/Ambient Temperature: -4°F to 122°F (-20°C to 50°C).
• Operating Temperature: 167°F (75°C).
• IP Rating: Dry location rated.
• Requires: Master DMX controller and 12-24V DC power supply — both sold separately.

Connections

• RJ45 In/Out
• XLR3 In/Out
• XLR5 In/Out
• LED output terminals (5 ports × 5 channels)
• 12–24V DC constant voltage input

Dimensions

• Length: 11.54" (293mm)
• Width: 3.62" (92mm)
• Height: 1.42" (36mm)

⚠ Important Installation Notes

• Requires a master DMX controller and 12-24V DC constant voltage driver for operation — both sold separately.
• Do not connect more than one power supply to the input side of the decoder.
• For dry location use only.

What's Included

• (1) 25-Channel DMX Decoder

Requires 12-24V DC power supply and DMX controller — sold separately.